Módulo:Convert/text

-- Text used by Module:Convert, for en.wikipedia.org (English).-- This is a separate module to simplify translation for use on another wiki.-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.local SIprefixes = {-- The prefix field is what the prefix should be, if different from the prefix used.['Y'] = { exponent = 24, name = 'yotta',                  },['Z'] = { exponent = 21, name = 'zetta',                  },['E'] = { exponent = 18, name = 'exa'  ,                  },['P'] = { exponent = 15, name = 'peta' ,                  },['T'] = { exponent = 12, name = 'tera' ,                  },['G'] = { exponent =  9, name = 'giga' ,                  },['M'] = { exponent =  6, name = 'mega' ,                  },['k'] = { exponent =  3, name = 'kilo' ,                  },['h'] = { exponent =  2, name = 'hecto',                  },['da']= { exponent =  1, name = 'deca' , name_us = 'deka' },['d'] = { exponent = -1, name = 'deci' ,                  },['c'] = { exponent = -2, name = 'centi',                  },['m'] = { exponent = -3, name = 'milli',                  },['μ'] = { exponent = -6, name = 'micro', prefix = 'µ'     },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC['µ'] = { exponent = -6, name = 'micro',                  },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5['u'] = { exponent = -6, name = 'micro', prefix = 'µ'     },  -- not an SI prefix, but allow for people typing this['n'] = { exponent = -9, name = 'nano' ,                  },['p'] = { exponent =-12, name = 'pico' ,                  },['f'] = { exponent =-15, name = 'femto',                  },['a'] = { exponent =-18, name = 'atto' ,                  },['z'] = { exponent =-21, name = 'zepto',                  },['y'] = { exponent =-24, name = 'yocto',                  },}-- Some units can be qualified with one of the following prefixes, when linked.local customary_units = {{ "US", link = "United States customary units" },{ "U.S.", link = "United States customary units" },{ "imperial", link = "Imperial unit" },{ "imp", link = "Imperial unit" },}-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").-- key = { "name", link = "article title", exponent = numeric_key_value }-- If lk=on and link is defined, the name of the number will appear as a link.local eng_scales = {["3"]  = { "thousand", exponent = 3 },["6"]  = { "million", exponent = 6 },["9"]  = { "billion", link = "1000000000 (number)", exponent = 9 },["12"] = { "trillion", link = "1000000000000 (number)", exponent = 12 },["15"] = { "quadrillion", link = "1000000000000000 (number)", exponent = 15 },}-- One of the following categories is included in the text of each message.local all_categories = {unit = "[[Category:Convert invalid units]]",option = "[[Category:Convert invalid options]]",}-- For some error messages, the following puts the wanted style around-- each unit code marked like '...%{ft%}...'.local unitcode_regex = '%%([{}])'local unitcode_replace = { ['{'] = '"', ['}'] = '"' }  -- no longer need the more elaborate substitute used before 2013-09-28-- All messages that may be displayed if a problem occurs.local all_messages = {-- Message format string, %s parameters: anchor, title, text, category.-- Each displayed message starts with "Convert:" so can easily locate by searching article.cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#%s|<span title="Convert: %s">convert: %s</span>]]</i>]</sup>%s',-- Each of following messages is a table:-- { [1] = 'title',         -- mouseover title text--   [2] = 'text',          -- link text displayed in article--   [3] = 'category key',  -- key to lookup category in all_categories--   [4] = 'anchor',        -- anchor for link to relevant section on help page--   regex = gsub_regex,--   replace = gsub_table,-- }                    Mouseover title text                           Link text               CatKey     Anchorcvt_bad_num        = { 'Value "%s" must be a number'                , 'invalid number'      , 'option',  'invalid_number'       },cvt_big_prec       = { 'Precision "%s" is too large'                , 'precision too large' , 'option',  'precision_too_large'  },cvt_invalid_num    = { 'Number has overflowed'                      , 'number overflow'     , 'option',  'number_overflow'      },cvt_no_num         = { 'Needs the number to be converted'           , 'needs a number'      , 'option',  'needs_number'         },cvt_no_num2        = { 'Needs another number for a range'           , 'needs another number', 'option',  'needs_another_number' },cvt_bad_frac       = { 'frac "%s" must be an integer above 1'       , 'invalid fraction'    , 'option',  'invalid_fraction'     },cvt_bad_prec       = { 'Precision "%s" must be an integer'          , 'invalid precision'   , 'option',  'invalid_precision'    },cvt_bad_sigfig     = { 'sigfig "%s" must be a positive integer'     , 'invalid sigfig'      , 'option',  'invalid_sigfig'       },cvt_empty_option   = { 'Ignored empty option "%s"'                  , 'empty option'        , 'option',  'empty_option'         },cvt_no_spell       = { 'Spelling is not available'                  , 'bug, ask for help'   , 'option',  'ask_for_help'         },cvt_unknown_option = { 'Ignored invalid option "%s"'                , 'invalid option'      , 'option',  'invalid_option'       },cvt_bad_default    = { 'Unit "%s" has an invalid default'           , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         },cvt_bad_unit       = { 'Unit "%s" is invalid here'                  , 'unit invalid here'   , 'unit'  ,  'unit_invalid_here'    },cvt_no_default     = { 'Unit "%s" has no default output unit'       , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         },cvt_no_unit        = { 'Needs name of unit'                         , 'needs unit name'     , 'unit'  ,  'needs_unit_name'      },cvt_unknown        = { 'Unit name "%s" is not known'                , 'unknown unit'        , 'unit'  ,  'unknown_unit'         },cvt_should_be      = { '%s'                                         , 'ambiguous unit'      , 'unit'  ,  'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace },cvt_mismatch       = { 'Cannot convert "%s" to "%s"'                , 'unit mismatch'       , 'unit'  ,  'unit_mismatch'        },cvt_bug_convert    = { 'Bug: Cannot convert between specified units', 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         },cvt_lookup         = { 'Unit "%s" is incorrectly defined'           , 'bug, ask for help'   , 'unit'  ,  'ask_for_help'         },}-- Text to join input value/unit with output value/unit.local disp_joins = {["or"]         = { " or "    , ""  },["sqbr-sp"]    = { " ["      , "]" },["sqbr-nbsp"]  = { "&nbsp;[" , "]" },["comma"]      = { ", "      , ""  },["slash-sp"]   = { " / "     , ""  },["slash-nbsp"] = { "&nbsp;/ ", ""  },["slash-nosp"] = { "/"       , ""  },["b"]          = { " ("      , ")" },["br"]         = { "<br/>"   , ""  },}-- Text to separate values in a range.local range_types = {-- Specifying a table requires "off" and "on" values (for "abbr=off" and "abbr=on");-- other fields are optional.-- Normally, "adj=on" uses hyphens with unabbreviated units (names, not symbols).-- However, "exception = true" means hyphens are also used with "adj=on|abbr=on".-- If "adj" is defined here, that text is used with "adj=on" (without hyphens).["+"]      = " + ",[","]      = ",&nbsp;",[", and"]  = ", and ",[", or"]   = ", or ",["by"]     = " by ",["-"]      = "–",["to about"] = " to about ",["and"]    = { off = " and ", on = " and ", exception = true },["or"]     = { off = " or " , on = " or " , exception = true },["to"]     = { off = " to " , on = " to " , exception = true },["to(-)"]  = { off = "&nbsp;to ", on = "–" },["+/-"]    = { off = "&nbsp;±&nbsp;", on = "&nbsp;±&nbsp;", adj = "&nbsp;±&nbsp;", is_range_change = true },["x"]      = { off = " by ", on = " ×&nbsp;", is_range_x = true },["xx"]     = "&nbsp;×&nbsp;",["*"]      = "×",  -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}}local range_aliases = {-- ["alternative name for a range"] = "standard range name"["and(-)"]   = "and",["&"]        = "and",["–"]        = "-",["&ndash;"]  = "-",["to-"]      = "to(-)",["×"]        = "x",["&times;"]  = "x",["±"]        = "+/-",["&plusmn;"] = "+/-",}-- The following "words" are accepted to make a simple range, for example, {{convert|1-2|ft}}.-- Words must be in correct order for searching, for example, '-' after '+/-' and 'x' after 'xx'.local range_words = { '+/-', 'to(-)', '-', 'xx', 'x', '*', 'by', 'to', 'or' }local ranges = {types = range_types,aliases = range_aliases,words = range_words,}-- Valid option names.local en_option_name = {-- ["local text for option name"] = "en name used in this module"["abbr"] = "abbr",["adj"] = "adj",["comma"] = "comma",["debug"] = "debug",["disp"] = "disp",["frac"] = "frac",["lang"] = "lang",["lk"] = "lk",["near"] = "near",["order"] = "order",["round"] = "round",["sigfig"] = "sigfig",["sing"] = "adj",                   -- "sing" is an old alias for "adj"["sortable"] = "sortable",["sp"] = "sp",["spell"] = "spell",}-- Valid option values.-- Convention: parms.opt_xxx refers to an option that is set here-- (not intended to be set by the template which invokes this module).-- Example: At en.wiki, "abbr" includes:--     ["comma"] = "opt_nocomma"-- As a result, if the template uses abbr=comma, this script sets:--     parms["opt_nocomma"] = true--     parms["abbr"] = nil-- Therefore parms.abbr will be nil, or will have one of the listed values-- that do not start with "opt_".local en_option_value = {["abbr"] = {-- ["local text for option value"] = "en value used in this module"["comma"] = "opt_nocomma",      -- no numsep in input or output numbers["def"] = "",                   -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")["h"] = "on",                   -- abbr=on + use "h" for hand unit (default)["hh"] = "opt_hand_hh",         -- abbr=on + use "hh" for hand unit["in"] = "in",                  -- use symbol for LHS unit["mos"] = "mos",                -- in a range, repeat the input unit (no longer used)["none"] = "off",               -- old name for "off"["off"] = "off",                -- use name for all units["on"] = "on",                  -- use symbol for all units["out"] = "out",                -- use symbol for RHS unit (default)["values"] = "opt_values",      -- show only input and output numbers, not units["~"] = "opt_also_symbol",      -- show input unit symbol as well as name},["adj"] = {["1"] = "opt_singular",         -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)["flip"] = "opt_flip",          -- reverse order of input/output["j"] = "opt_use_nbsp",         -- "join": use "&nbsp;" instead of " " between value and unit name["mid"] = "opt_adj_mid",        -- adj=on with user-specified text before input unit["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers["off"] = "",                   -- ignored (off is the default)["on"] = "opt_adjectival",      -- unit name is singular and hyphenated["pre"] = "opt_one_preunit",    -- user-specified text before input unit["ri0"] = "ri0",                -- round input with precision = 0["ri1"] = "ri1",                -- round input with precision = 1["ri2"] = "ri2",                -- round input with precision = 2["ri3"] = "ri3",                -- round input with precision = 3},["comma"] = {["5"] = "opt_comma5",           -- only use numsep grouping if 5 or more digits["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits["gaps5"] = "opt_gaps, opt_comma5",  -- opt_gaps + opt_comma5},["debug"] = {["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible},["disp"] = {["/"] = "slash",                -- join: '/'["2"] = "opt_output_only",      -- display only output value and symbol/name (not input)["5"] = "opt_round5",           -- round output value to nearest 5["b"] = "b",                    -- join: '(...)'["br"] = "br",                  -- join: '<br/>'["comma"] = "comma",            -- join: ','["flip"] = "opt_flip",          -- reverse order of input/output["flip5"] = "opt_flip, opt_round5",  -- disp=flip + disp=5["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name)["or"] = "or",                  -- join: 'or'["out"] = "opt_output_only",["output number only"] = "opt_output_number_only",["output only"] = "opt_output_only",["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units["s"] = "slash",                -- join: '/'["slash"] = "slash",            -- join: '/'["sqbr"] = "sqbr",              -- join: '[...]'["table"] = "opt_table",        -- output is suitable for a table cell with align="right"["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center"["u2"] = "opt_output_unit_only",  -- display output symbol/name (not input, and not output value)["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known["unit2"] = "opt_output_unit_only",["x"] = "x",                    -- join: <first>...<second> (user-specified text)},-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more["lang"] = {["en"] = "opt_lang_en",         -- use en digits for output, regardless of local language},["lk"] = {["in"] = "in",                  -- link LHS unit name or symbol["off"] = "off",                -- do not link: same as default except for hand unit["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit)["out"] = "out",                -- link RHS unit name or symbol},["near"] = {["5"] = "opt_round5",           -- round output value to nearest 5},["order"] = {["flip"] = "opt_flip",          -- reverse order of input/output},["round"] = {["5"] = "opt_round5",           -- round output value to nearest 5["25"] = "opt_round25",         -- round output value to nearest 25["each"] = "opt_round_each",    -- using default precision in a range, round each output separately (default uses highest precision of each item in range)},-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more["sortable"] = {["off"] = "",                   -- ignored (off is the default)["in"] = "opt_sortable_in",     -- output numeric hidden sort field for use in a sortable table, based on input["on"] = "opt_sortable_in",     -- same["out"] = "opt_sortable_out",   -- same, based on output},["sp"] = {["us"] = "opt_sp_us",           -- use U.S. spelling (like "meter" instead of default "metre")},["spell"] = {                       -- only English spelling is supported; not scientific notation; only some fractions["in"] = "opt_spell_in",        -- spell input value in words["In"] = "opt_spell_in, opt_spell_upper",                -- spell input value in words with first letter uppercase["on"] = "opt_spell_in, opt_spell_out",                  -- spell input and output values in words["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase},}return {SIprefixes = SIprefixes,all_categories = all_categories,all_messages = all_messages,currency = { ['$'] = true, ['£'] = true },customary_units = customary_units,disp_joins = disp_joins,en_option_name = en_option_name,en_option_value = en_option_value,eng_scales = eng_scales,ranges = ranges,}