The Butler oscillator is a crystal-controlled oscillator that uses the crystal near its series resonance point. They are used where a simple low-cost circuit is needed which can oscillate at high frquencies (>50MHz[1]) by using overtones of a crystal, and also giving low low phase noise.[2]
It was described by Butler in 1946 as the earthed grid oscillator, a derivative of the Hartley oscillator.[3] It is also known as the bridged-T oscillator or the grounded-base oscillator.[4]
Circuit operation
The classic Butler oscillator circuit is a two-stage circuit with two non-inverting stages, a grounded base stage and an emitter follower.[5] The crystal is inserted in series in the overall feedback path.[5]
The more common modern form of the circuit uses just the emitter follower stage.[1][6] The circuit may be analysed by considering it as a equivalent AC circuit with three parts. The emitter follower forms an amplifier with no phase shift. The crystal and its loading capacitor then produce a phase lag network, followed by the LC network of the resonant tank circuit. This then produces a phase lead, which overall meets the Barkhausen criteria for self-oscillation.[1]
The Butler circuit is a free-running or tuned oscillator. If the crystal is replaced temporarily with a low value resistor, the circuit will still oscillate at approximately the design frequency of the tank circuit. This allows the circuit to be set-up and adjusted initially without the crystal, and also encourages the selection of the correct crystal harmonic.[6] To avoid the circuit oscillating at the strong resonance of the crystal's fundamental, a small inductor may be placed in parallel with the crystal.[1][6]
Both the better-known Pierce and Colpitts oscillator circuits may be considered as derivatives of the Butler.[6][i]
References
Further reading
- Carr, Joe (September 1999), "Crystals Made Clear I", Electronics World: 780–783
- Carr, Joe (October 1999), "Crystals Made Clear II", Electronics World: 849–855
- US 6741137, Sibrai, Andreas & Fritzwenwallner, Kurt, "High quality serial resonance oscillator", published 6 January 2003, issued 25 May 2004
- US 3996530, Feistel, Claude Herbert & Gianos, Theodore, "Butler oscillator", published June 30, 1975, issued Dec 7, 1976, assigned to International Business Machines Corporation
External links
- Two-transistor Butler Archived 2015-02-08 at the Wayback Machine
- "Technicana: Series Resonant Crystal Oscillators" (PDF), Radio Manufacturing and Broadcasting: 6–7, October 1946